Bridge Assist

Auto-sneaks at block edges so you bridge without falling off, with Normal and God Bridge techniques.

Bridge Assist automatically sneaks at block edges so you don't fall off while bridging. It covers two techniques: Normal mode, which handles standard sneak-bridging, and God Bridge mode, which uses a more advanced timing method to place blocks while walking forward without crouching each time.

Mode

Mode selects the bridging technique (default Normal). Normal sneaks at the block edge to hold your position while you place; God Bridge is an advanced technique that places blocks mid-stride without full crouching. God Bridge locks your camera during placement, so binding a key to toggle it in and out is strongly recommended.

Normal mode

Only Right Click (off by default) limits Bridge Assist to only engage while you're actively right-clicking to place a block. Unsneak Delay, from 0 to 100 ms (default 10), sets how long to wait before releasing sneak after each placement, giving the server time to register the block before you step back. Edge Offset, from 0 to 1 block (default 0.2), sets how close to the edge you must be before auto-sneak triggers — lower values require you to be right at the lip, higher values trigger earlier. Randomize (off by default) varies the timing of sneak inputs so your bridging pattern looks less like a macro. Unsneak On Disable (on by default) releases sneak the instant you turn Bridge Assist off, so you don't stay stuck in a crouch. Auto Place (on by default) automatically holds right-click so blocks place whenever your crosshair hits a valid surface, without you holding the button yourself.

God Bridge mode

Enable FastPlace (off by default) enables the Fast Place module alongside God Bridge to remove the vanilla placement cooldown, letting you place faster. Auto Place (on by default) holds right-click automatically and removes placement delay so blocks register as soon as your crosshair is over a valid surface — it also responds to the Looking Down Pitch condition. Stall Factor, from 0.10 to 0.90 (default 0.50), is a speed multiplier applied while you hang off the block edge; lower values slow you down more, giving the server extra time to register the block before you step forward. God Bridge Correction (on by default) tracks your walking direction and gently corrects sideways drift to keep you on the intended bridge line.

Block management

Switch To Block On Toggle (off by default) auto-equips your block slot the moment you turn Bridge Assist on. Auto Switch On Low (on by default) swaps to a hotbar slot with more blocks once your held stack runs low, so you keep bridging without interruption — Low Block Threshold sets that cutoff, from 1 to 16 blocks (default 1). Bridge Assist Blocks is a block selector limiting which block types are considered for Auto Place, Auto Switch, Switch-on-Toggle, and the Holding Blocks condition; leave it empty to allow all blocks.

Preview

Preview ESP (off by default) draws a wireframe outline at the position Bridge Assist would place next, so you can see exactly what it's about to do. Its color is set by Preview Color (default green).

Conditions

All checked conditions must be true at the same time for Bridge Assist to engage. Looking Down is checked by default; the rest are off:

• Sneak Key Pressed

• Holding Blocks

• Looking Down

• Moving Backwards

When Looking Down is checked, Looking Down Pitch sets the downward camera angle required to trigger bridge sneak and Auto Place, from 30° to 90° (default 50°).

Recommended: enable Switch To Block On Toggle and bind a key so you can snap in and out of bridge mode cleanly. Turn on Randomize in Normal mode to avoid uniform sneak timings. In God Bridge mode, start with the default Stall Factor and raise it gradually until blocks stop missing.